No one wants to live in a home or work in an office with a dirty floor. Keeping the floor looking nice and clean can be a little challenging especially when you don’t have a clue how to approach the process. If you want your floor to keep looking clean,well maintained and attractive,there are a few things that you need to do on a regular basis. Just about anyone can mop clean a floor,some times,but there are some other processes that are performed on floors such as stripping that require a certain level of expertise.If you have the time and skills needed to work on your floor,there is no reason you can’t handle the process and save a few bucks in the process. For those people without the time or the experience to handle the processes,there are trustworthy floor maintenance technicians who will be more than happy to solve this problem in Lubbock. In this article,you will learn a few things about each of the three processes.
For the most part,all you have to do to keep the floor clean is sweeping and mopping. Remove spilled liquids and foods immediately the accident happens. At this point,you may want to use a vacuum cleaner to deal with excess mess and dirt as this can save you a lot of time and energy.
Floor mats in places where traffic is heavy helps to preserve your floor. If there are stains on your floor,you need to remove them;your ordinary nail polish could do wonders here. Sensitive floor surfaces may require you to use microfiber mops which will not damage the floor. Floor scrubbers are suitable for commercial and industrial use. Choose the right cleaning solution.
Stripping follows after cleaning. This process aims at removing embedded dirt and scratches that are noticeable on the surface after a thorough cleaning. You need to have the appropriate protective clothing and the place where you will be doing the stripping should be well ventilated;be careful and only use the most suitable chemical for your floor. You can use a mop to apply the chemical evenly all over the surface,avoiding excess in certain areas. The purpose of stripping is to remove all the wax from the floor so that the surface can take up a new coat. Use either a squeegee or a wet-dry vacuum machine to suck away the wax and the stripping solution. Water and a mop should then be used to clean the floor.
Put some wax into a bucket,dip the head into the solution but make sure there isn’t too much wax on the mop;apply a thin layer of wax on your floor from the farthest place ,working towards the exit. Allow the wax to dry and then repeat the process up to 5 times depending on the condition of the floor. Buffing is finally done to give the floor a clean,fresh,shiny gloss that makes it look fabulous.
If you really don’t feel like committing to all this,why not call a reliable Lubbock floor maintenance specialist?